Pumps

Amperometric sensor SCLO 3 HYCHLOR free (residual) chlorine

SCLO 3 HYCHLOR

Connection: 1/2 "nipple for 10x14 hose.

SCLO 3 HYCHLOR in-line amperometric free (residual) chlorine sensor, complete with a flow sensor and a built-in injection valve (for supplying a sensor cleaner). The sensor is designed to work with sodium hypochlorite (at10tion - inorganic chlorine only).

Supplied assembled, complete with: flow regulator, chlorine sensor, flow sensor, hose, copper electrode cleaning solution. Built-in sampling nipple and injection valve for feeding the measuring sensor.

The installation of 2 probes (pH and RedOx level, 12 mm in diameter), a place for installing a temperature sensor and a flow sensor is provided.

For proper operation of the SCLO 3 HYCHLOR chlorine sensor, a constant flow of 40-60 l /h is required.

SCLO 3 HYCHLOR specifications:

  • Measuring range CL2: 0-2 mg /l. Constant value between pH 3 and pH 6 for measuring free chlorine (CL2). More than 6 pH are measured by chloramines NH2CL.
  • Stable measurement of free inorganic chlorine in water: in the 6-8 pH range.
  • Measurement type: galvanometric.
  • Chlorine sensor electrodes materials: Platinum /Copper.
  • Maximum running water temperature up to 45 ° C.
  • Maximum system back pressure: up to 5 bar.
  • Required water flow: 40-60 l /h.
  • Hose connection: 1/2 "nipple for 10x14 hose (inner diameter 10 mm).
  • Connection: flow sensor, 2 electrodes (pH and RedOx), 1 temperature sensor.
  • Execution material: plexiglass /polypropylene weight.
  • Weight: 1.3 kg.
  • Dimensions: 200x190x50 mm.
Name Controllers /Pumps vendor code Price without VAT, (€)
Chlorine sensor SCLO 3 HYCHLOR
Cl + pH-Rx-T two-wire
th
AG-Select - eSELECT - eCONTROL - DLX (B) pH-Rx-Cl /M - BT pH-Rx-Cl /M - e1 PLUS SPS0002201 1103
Chlorine sensor SCLO 3 HYCHLOR
Cl + pH-Rx-T three-wire
R - B - eMULTICONTROL SPS0002203 1103
At10tion!To connect the SCLO 3 HYCHLOR free chlorine sensor to eSELECT liquid analyzers and dosing pumps with built-in controllers, a signal adapter cable for connecting the SCLO 3 HYCHLOR chlorine sensor is required (not included in the delivery set, purchased separately)

Principle of operation:

Two electrodes immersed in a solution containing oxidants generate an electrical current proportional to the concentration of the oxidizing agents. The electrodes are made of copper (cathode) and platinum (anode). A negative voltage is formed at the cathode, and a positive voltage at the anode. These electrical signals must be processed with a suitable electronic unit. Generating a voltage, albeit small (a few mA per mg /L), leads to oxidation of the electrode surface (in particular the cathode), cleaned by continuous friction of the glass beads.

Installing the SCLO 3 HYCHLOR holder:

  • Install the sensor on a wall or panel, connect all hydraulic parts
  • To ensure reliable operation, we recommend installing a 50-80 micron filter and an activated carbon filter in front of the sensor
  • Connect the chlorine sensor wires to the controller, strictly observing the polarity according to their color:
    BROWN - Platinum (PT)
    BLUE - Copper (CU)
  • The cell provides for the connection of a flow sensor, 2 sensors (pH and Rx) and a temperature sensor (model A-ST2)
  • After starting the system, adjust the flow rate with the regulator so that the level sensor reaches the required mark, the flow rate is 50 l /h.
  • Turn on the controller and calibrate according to the instructions for the controller

Location of the main elements of SCLO 3 HYCHLOR:

 

Расположение основных элементов SCLO 3 HYCHLOR

 

Detail of the SCLO 3 HYCHLOR sensor holder

 

Деталировка держателя датчиков SCLO 3 HYCHLOR

vendor code Name amount POSITION
DPS0002201 Chlorine sensor holder SCLO 3 HYCHLOR 1 13
SEL0005011 Chlorine sensor SCLO 3 HYCHLOR (without housing) 1 4
4031002 Nipple nut 4x6 1 25
DGH0006101 Nipple nut 50L V2 2 11
DGH0006301 Threaded part of the PVC chlorine sensor 1 3
DID0005101 Flow indicator D12 1 20
DMA0005401 Sampler handle 1 5
DMA0005701 P1 flow regulator 1 8
4042117 Ring 10x1.5 NBR x PG7 1 2
4042044 Ring 106 FPM 6.75x1.78 3 6
4042052 Ring 2018 FPM 4.48x1.78 2 7
4042039 Ring 2062 FPM 15.60x1.78 3 9
DOR0006701 Ring 3021 FPM 5.23x2.62 6 27
DOR0000801 Ring 3062 FPM 15.54x2.62 2 26
DOR0000201 Ring 3075 FPM 18.72x2.62 1 21
DPS0002301 IN-LINE PP probe holder 1/2 '' 2 23
4124002 Cable clamp PG7 + cable 1 1
4031006 Nipple PP 3/8 "- 4x6 1 18
4031020 Nipple D6 3/8 "- 10x14 2 10
DRA0005101 Sampler nipple 1 15
ASO0000702 Flow sensor 2 FILI N.A. 1 12
KSF0000101 Ball PYREX D3 30 19
4147001 Valve seat 1 17
DTP0005701 Plug 1/2 " 1 22
4031016 Protective cap 1 24
4144016 Valve А11 FPM 1 16
DVI0007001 Bolt UNI5923 М12х10 PVC 6 14
This category does not contain any products.
Sale
Price:
$7,182.33
Pre-order only
- +
13936_22__CAR/SIC__EPDM__304__G60
Mechanical seal R-MG1 22, CAR/SIC, EPDM, 304, G60
Price:
$39.53
Pre-order only
- +
Price:
$90.21
Pre-order only
- +
Price:
On request
Pre-order only
- +
Price:
On request
Pre-order only
- +
0
Select site language:
deuusapolrus