Pumps

Liquid analyzer pH /RedOx (ORP) /CL (ppm) eSELECT B2

Анализатор жидкости рН / RedOx (ОВП) / CL (ppm) eSELECT B2

eSELECT B2 is a high-precision liquid analyzer for measuring electrochemical parameters: pH, RedOx (ORP), free (total) organic or inorganic chlorine to choose from.

Liquid analyzers (controller) eSELECT B2 are equipped with a color LCD display with backlight and include a Russian menu, made in a plastic case for wall mounting.

The eSELECT B2 Liquid Analyzer contains galvanically isolated electronic components that provide a high level of immunity to electromagnetic interference.

Name vendor code
Liquid analyzer eSELECT B2, 90-260V CXB5005101
Liquid analyzer eSELECT B2, 12V DC - 24V DC /AC CXB5005111

SPECIFICATIONS

  • Two measuring parameters to choose from: pH or Rx or free /total chlorine CL or measurement in PPM mode.
  • Continuous dosing time alarm.
  • Alarm signaling for concentration limits of MIN / MAX levels.
  • Menu type selection: Standard / Expert.
  • Russified menu.
  • Start delay, measurement delay.
  • Password protection of the settings made.
  • The controller has a dosing control mode: constant ON / OFF and PROP. proportional.
  • Two independent ON / OFF outputs (non-contact relay) for each measured parameter.
  • Two independent 4-20 mA outputs for each SETPOINT.
  • The liquid analyzer supports the connection of a flow sensor, a reagent level sensor, and a PT100 temperature sensor (sensors not included).
  • Automatic temperature compensation (when connecting a PT100 sensor).
  • The controller has a clock and a timer for daily or weekly programming of operating modes.
  • Power supply voltage in standard version: 90-260 V AC 50/60 Hz; on request: 12-24 V DC; 24 VAC.
  • Power consumption: 15W (1A peak current).
  • Operating temperature range: 0-40 ° C.
  • Dust and moisture protection class: IP65.
  • PH measurement range: 0-14 (resolution 0.01pH).
  • RedOx measurement range (ORP): –1000 ... + 1400 mV (resolution 1mV).
  • Chlorine measurement range (free or residual): 0-2 mg / l; 0-20 mg / l; 0-200 mg / l; 0-2000 mg / l (resolution 0.001 / 0.01 / 0.1 / 1 mg / l).
  • Measurement range in PPM mode: 0-2 PPM; 0-20 PPM; 0-200 PPM; 0-2000 PPM (resolution 0.001 / 0.01 / 0.1 / 1 PPM).
  • Measured temperature range: 0-100 ° C (resolution 0.1 ° C).

The eSELECT B2 Liquid Analyzer is equipped with the following outputs:

  • Relay output ON / OFF (non-contact relay NO / NC) for controlling metering pumps or other actuators operating in ON / OFF mode (max.current 16A with resistive load; 3A with inductive load).
  • Two independent ON / OFF relay outputs per measurement channel.
  • Current output (analog): 4-20 mA (dynamic 0..500 Ω).
    Two independent current outputs 4-20 mA per measurement channel.
  • TTL output: 0-999 pulses / min. Two independent TTL outputs per measurement channel.
  • Alarm relay output ALARM ON / OFF (non-contact relay NO / NC), alarm on time of continuous dosing and on limit concentrations of MIN / MAX levels
    (max. current 5A with resistive load; 0.7A with inductive load).
  • AUX ON / OFF relay output for timer control of actuators (scheduled operation)
    (max. current 5A with resistive load; 0.7A with inductive load).
  • RS232 output (RS232 serial port) for connecting a PC or supervisor.

The eSELECT B2 Liquid Analyzer is equipped with the following inputs:

  • BNC input for connecting a signal from pH or RedOx or Chlorine sensors.
  • Input (plug type "Hirschmann") for connecting the power supply to the SONDA CL chlorine sensor.
  • Flow sensor input.
  • Input for connecting a PT100 temperature sensor.
  • Input for the reagent level sensor.
  • The controller has two independent inputs for a reagent level sensor per measurement channel.
This category does not contain any products.
Sale
Price:
$7,182.33
Pre-order only
- +
13936_22__CAR/SIC__EPDM__304__G60
Mechanical seal R-MG1 22, CAR/SIC, EPDM, 304, G60
Price:
$39.53
Pre-order only
- +
Price:
$90.21
Pre-order only
- +
Price:
On request
Pre-order only
- +
Price:
On request
Pre-order only
- +
0
Select site language:
deuusapolrus