Gleitringdichtung R-TSSP-CO1
Gleitringdichtung R-TSSP-CO1
Temperatur: -20 ° ~ 200 °
Druck: ≤ 4,0 MPa
Geschwindigkeit: ≤3600 U /min
Material
- Drehring: Carbon /SIC /TC.
- Stationärer Ring: Keramik /SIC /TC
- Faltenbalg: NBR / EPDM / VITON.
- Feder: SS304 / SS316.
- Metallteile: SS304 / SS316.
| d | L1 | L3 | d412 | d2 | d1 | 14 | ||||||
| (Inches) | 3/8 | 1/2 | 5/8 | 3/4 | 7/8 | Nom | max | |||||
| 1,500 | 2,00 | 3,38 | 3,50 | 5,00 | 1/16 | 2,75 | 2,25 | 2,50 | 0.56 | |||
| 1,625 | 2,00 | 3,50 | 3,63 | 5,00 | 1/16 | 2,88 | 2,38 | 2,63 | 0.56 | |||
| 1,688 | 2,00 | 3,63 | 3,75 | 5,00 | 1/16 | 3,00 | 2,50 | 2,75 | 0.56 | |||
| 1,750 | 2,00 | 3,63 | 3,75 | 5,00 | 1/16 | 3,00 | 2,50 | 2,75 | 0.56 | |||
| 1,875 | 2,00 | 3,75 | 3,88 | 5,00 | 1/16 | 3,13 | 2,63 | 2,88 | 0.56 | |||
| 1,937 | 2,00 | 3,94 | 4,06 | 5,00 | 1/16 | 3,25 | 2,75 | 3,00 | 0.56 | |||
| 2,000 | 2,00 | 3,94 | 4,06 | 5,00 | 1/16 | 3,25 | 2,75 | 3,00 | 0.56 | |||
| 2,125 | 2,00 | 4,06 | 4,19 | 4,32 | 6,00 | 1/16 | 3,38 | 2,88 | 3,13 | 0.69 | ||
| 2,250 | 2,00 | 4,19 | 4,32 | 4,44 | 6,25 | 1/16 | 3,50 | 3,00 | 3,25 | 0.69 | ||
| 2,375 | 2,00 | 4,50 | 4,62 | 4,75 | 6,50 | 1/16 | 3,63 | 3,13 | 3,38 | 0.69 | ||
| 2,437 | 2,00 | 4,57 | 4,70 | 4,82 | 6,50 | 1/16 | 4,00 | 3,25 | 3,75 | 0.69 | ||
| 2,500 | 2,00 | 4,57 | 4,70 | 4,82 | 6,50 | 1/16 | 4,00 | 3,25 | 3,75 | 0.69 | ||
| 2,750 | 2,50 | 5,56 | 5,68 | 7,75 | 1/8 | 4,75 | 3,75 | 4,25 | 0.69 | |||
| 3,000 | 2,50 | 5,82 | 5,95 | 8,00 | 1/8 | 5,00 | 4,00 | 4,50 | 0.72 | |||
| 3,250 | 2,50 | 6,13 | 6,25 | 8,25 | 1/8 | 5,25 | 4,25 | 4,75 | 0.72 | |||
| 3,500 | 2,50 | 4,32 | 6,45 | 6,57 | 8,50 | 1/8 | 5,50 | 4,50 | 5,00 | 0.81 | ||
| 3,750 | 2,50 | 4,50 | 6,63 | 6,75 | 8,75 | 1/8 | 5,75 | 4,75 | 5,25 | 0.81 | ||
| 4,000 | 2,50 | 6,82 | 6,95 | 7,07 | 9,00 | 1/8 | 6,00 | 5,00 | 5,50 | 0.81 | ||
| 4,250 | 2,50 | 7,00 | 7,13 | 7,25 | 9,25 | 1/8 | 6,25 | 5,25 | 5,75 | 0.81 | ||
| 4,500 | 2,50 | 7,25 | 7,38 | 7,50 | 9,50 | 1/8 | 6,50 | 5,50 | 6,00 | 0.81 | ||
| 4,750 | 2,50 | 7,50 | 7,63 | 7,75 | 9,75 | 1/8 | 6,75 | 5,75 | 6,25 | 0.81 | ||
| 5,000 | 3,75 | 8,32 | 8,45 | 8,57 | 11,00 | 1/8 | 7,50 | 6,25 | 7,00 | 0.94 | ||
| 5,500 | 3,75 | 8,82 | 8,95 | 9,07 | 11,50 | 1/8 | 8,00 | 6,75 | 7,50 | 0.94 | ||
| 6,000 | 3,75 | 9,32 | 9,45 | 9,57 | 12,00 | 1/8 | 8,50 | 7,25 | 8,00 | 0.94 | ||
| 6,500 | 3,75 | 9,82 | 9,95 | 10,07 | 12,50 | 1/8 | 9,00 | 7,75 | 8,50 | 0.94 | ||
| 7,000 | 3,75 | 10,32 | 10,45 | 10,57 | 13,00 | 1/8 | 9,50 | 8,25 | 9,00 | 0.94 | ||
| 7,250 | 3,75 | 10,57 | 10,70 | 10,82 | 13,25 | 1/8 | 9,75 | 8,50 | 9,25 | 0.94 | ||
| 7,500 | 3,75 | 10,82 | 10,95 | 11,07 | 13,50 | 1/8 | 10,00 | 8,75 | 9,50 | 0.94 | ||
| 7,750 | 3,75 | 11,07 | 11,20 | 11,32 | 13,75 | 1/8 | 10,25 | 9,00 | 9,75 | 0.94 | ||
This category does not contain any products.
Sale
13936_22__CAR/SIC__EPDM__304__G60
Pumpenwellendichtung R-MG1 22, CAR/SIC, EPDM, 304, G60
14556_12__SIC/SIC__EPDM__304
Gleitringdichtung für Grundfos R-706H(CR) 12, SIC/SIC, EPDM, 304
