PRO series

DDI Series Decanter Centrifuges; consists of a horizontal rotating drum to ensure high centrifugal force, the auger that ensures the continuous discharge of the solids separated in the drum, and a double drive system that controls the speed difference between this drum and the auger, ensuring the required amount of power transfer to the auger.

The DDI series was developed by HAUS to meet the general needs of industries requiring durability such as chemical, pharmaceutical, fats and oils, mining and extraction proteins, processing of mineral oils and fuels. The main purpose of the DDI Series decanter centrifuge is separating the liquid mixture from its solid and obtaining one or two pure liquids, with as much a drier solid. The DDI Series decanter centrifuge is very useful for obtaining valuable materials in the processing of by-products, and in the recovery processes of waste processing.

Максимальная Производительность
Maximum performance
Thin drum rotates at a very high speed to ensure high centrifugal force (G) for the highest level of dehydration.
Гибкая Конфигурация
Flexible Configuration
Selection of production materials, wear protection, engine power and torque provide flexible configuration.
Сенсорное Управление
Touch Control
HMI and PLC; This allows the decanter to automatically operate in different modes, drain the sludge and perform other process parameters; and monitor alerts.
Работа в 2 фазы / 3 фазы
2-phase /3-phase operation
Flexible design allowing 2 or 3 phase operation.
Гигиеническая Конструкция
Hygienic Design
Use of food grade materials and lubricants, and easy cleaning and cleaning ensure high hygiene.
Одиночный Мотор (Монопривод)
Single Motor (Mono Drive)
While the main motor is controlled by the VFD, the auger speed is fixed with using a simple pulley system for easy operation.

OLIVE PRO 31 (2 PHASE)

SPECIFICATIONS
INSTALLED MOTOR POWER 49.49 kW

OLIVE PRO 33 (2 PHASE) /OLIVE PRO 33 (3 PHASE)

SPECIFICATIONS
INSTALLED MOTOR POWER 69.69 kW /63.69 kW

OLIVE PRO 52 (2 PHASE) /OLIVE PRO 52 (3 PHASE)

SPECIFICATIONS
INSTALLED MOTOR POWER 96.93 kW /91.83 kW

OLIVE PRO 53 (2 PHASE) /OLIVE PRO 53 (3 PHASE)

SPECIFICATIONS
INSTALLED MOTOR POWER 103.91 kW /96.81 kW

OLIVE PRO 54 (2 PHASE) /OLIVE PRO 54 (3 PHASE)

SPECIFICATIONS
INSTALLED MOTOR POWER 109.91 kW /105.91 kW
* HAUS reserves the right to make changes to specifications shown here without prior notice to the customer.
This category does not contain any products.
Sale
Price:
$7,182.33
Pre-order only
- +
13936_22__CAR/SIC__EPDM__304__G60
Mechanical seal R-MG1 22, CAR/SIC, EPDM, 304, G60
Price:
$39.53
Pre-order only
- +
Price:
$90.21
Pre-order only
- +
Price:
On request
Pre-order only
- +
Price:
On request
Pre-order only
- +
0
Select site language:
deuusapolrus