Tri-Pak
Tri-Pak
Tri-pack was invented by Jaeger Tri. Generally speaking, not very big surface are of this packing is its biggest advantage. The disstinctive shaping of ribs, struts and deip drops rods Tro-Pack's packing medis superior wetting characteristics, and the ability to maintain uniform liquid distribution through the bed.
| Size (mm) |
Surface Area (m2/m3) |
Voidage | Bulk Number (n/m3) |
Bulk Density (kg/m3) |
Dry Packing Factor (m-1) |
|---|---|---|---|---|---|
| 25 | 85 | 90% | 81200 | 81 | 28 |
| 32 | 70 | 92% | 25000 | 70 | 25 |
| 50 | 48 | 93% | 11500 | 62 | 16 |
| 65 | / | / | 4800 | 79.2 | / |
| 95 | 38 | 95% | 1800 | 45 | 12 |
| Material/Performance | Density (After Injection Molding) (g/cm3) |
Operation Temperature (°C) |
Chemical Corrosion Resistance | Compression Strength (MPa) |
|---|---|---|---|---|
| PE | 0.98 | 90 | good | >6.0 |
| PP | 0.96 | >100 | good | >6.0 |
| RPP | 1.2 | >120 | good | >6.0 |
| PVC | 1.7 | >60 | good | >6.0 |
| CPVC | 1.8 | >90 | good | >6.0 |
| PVDF | 1.8 | >150 | good | >6.0 |
Sort by:
Sale
13936_22__CAR/SIC__EPDM__304__G60
Mechanical seal R-MG1 22, CAR/SIC, EPDM, 304, G60
14556_12__SIC/SIC__EPDM__304
Mechanical seal for Grundfos R-706H (CR) 12, SIC/SIC, EPDM, 304
