The metering system for laudries LAUNDRY CONTROL SYSTEM Х.100.Х.0 230V

LAUNDRY CONTROL SYSTEM Х.100.Х.0 230V - is the authomatic system that can control supplies of detergents and additives in dosing systems for industrial laundries, and control at the same time 4 washing machines, authomatically controlling 7 dosing devices of peristaltic, electromagnetic and electromechanic types. The full system consist of: • Controller (up to 40 programs for each device) • Setallite device (one for each washing machine, maximum 4) • The main electrical valve. • Dosing collector up to seven places with reversed valves. • Dosing equipment (maximum 7) • Solenoidal (electromagnetic) or pneumatic valves for dosing control in diffrent washing machines (maximum 4) •USB-accumulator of configuration with a help of the software (of choice). Controller is the central element of the system and deals with operating of pumps through the commands which are installed in programs and orders from the satellite device. Programs are kept inside the internal memory of the controller and can be written on the controller or through the special software for PC, in this case it needs the portative memory with USB back scratcher for transporting programs from PC to the controller; panel of washing machine from the washing system of controller to the PC. The satellite device - is a device that is located on machine and connected to controller through the cabel. It might be connected to exit ports of washing machine (up to 6 inputs). From the hydraulic point of view, water inlet opening will be managed with a help of the main solenoid valve, the output of wich is connected with the reducing pipe, in which it connected with rose knots of all pumps. The output of the reducing pipe is connected with tube directly to the washing machine (if it is single in the system) or it can be connected by several solenoid (electromagnetic) valves parallel (the available quantaty depends on the washing machine). That is why the output of every electrical valve might be connected by hose with it's washing machine. COMMON TECHNICAL DATA OF THE SYSTEM • 230 Wt • Control up to 7 feeders and 4 different washing machines • 10-128 commands for each of 4 washing machines • The authomatical recovering after the power dump • Easy programing • Input control of the level • The output for the signal of readiness of innitial products. • Programmable phases of slowing • Functions of pumps bleeding and calibration. THE TECHNICAL DATA OF THE CONTROLLER • 7 outputs for perestailtic dosing pumps • 5 outputs for solenoid (electromagnetic) valves (one input) • 1 output alarm signal • 1 port RS485 for connection to the satellite device • 1 input for controller connection • 1 input of the controller's level. TECHNICAL DATA OF THE SATELLITE DEVICE • 1 port RS485 for connection to the additional satellite device (maximum 4) • 6 inputs for the connection to the washing machine for the identefying the following program status • 1 output for the blocking of the washing machine