ATEX FL EX A200-20, 380V насос знято з виробництва

Application of the pump: wastewater treatment, seawater treatment and desalination, water treatment in the textile, leather and metallurgical industries, thermal water pumping and petrochemical plants, industrial chemical processes. Hydraulic part: the surface centrifugal monoblock pump with closed impeller is suitable for pumping aggressive liquids and hydrocarbons without solid particles. The impeller and pump housing are made of high-thickness AISI 304/316 stainless steel, which provides higher mechanical and corrosion resistance. The pump body is polished inside and out to ensure the highest level of Hygiene, and the small number of welds ensures higher hydraulic efficiency and reliability. Single mechanical seals. A double-sealed version suitable for carbon processing (ID EX series) is available. Certificates ATEX II 2G Ex h IIC T3 Gb ATEX II 2D Ex h IIIC T120 ° C Db. Motor: ATEX asynchronous motor, 50 Hz, 2 poles of the FL EX a series 2800 rpm, 4 poles of the FL EX B series 1400 rpm.; II 2G or II 2D protection; operating voltage: three-phase 380V; ambient temperature: minimum -20 ° C-maximum + 40 °C. Operating conditions: the pumps cannot operate in dry conditions; the temperature of the pumped liquid: minimum 0 °c-maximum + 120 °C; all protective equipment can be selected according to the operating instructions attached to the pump and the operating conditions, in accordance with the current installation regulations in an explosive environment. Accessories: control panel; intrinsically safe module with ATEX power supply circuit for ATEX electronic level sensor and ATEX level controller; ATEX level controller with 5, 10 or 20 m electrical cable; ATEX electronic level sensor (or ID ATEX); motor pump coupling with double seal system with oil chamber and thermal protection; stainless steel carriage with conductive wheels, ATEX switch included.