Decanter centrifuge FLOTTWEG Decanter C4E-4/454 with SP3.11

The price is indicated on the terms of delivery of FCA Vilsbiburg. Horizontal, cylindrical/conical centrifuge for continuous dewatering of the supplied suspension. The purified liquid phase flows to the cylindrical end of the drum, where it exits through spillway rings and larger outlet openings. Easily replaceable spillway rings allow you to precisely adjust the depth of the pool (the separation point) inside the drum. The dehydrated solids are transported to the conical end of the drum, where they are unloaded through ports under the action of centrifugal force. Technical data: Inner diameter of the drum: 470 mm. Diameter/length ratio: 1:4. Length/width/height in mm: About 3520 x 1140 x 1030 mm. Weight: About 2600 kg. Differential speed: 1.0 - 20.0 rpm. Material: Parts of the drum in contact with the product: duplex stainless steel. 1.4463 high quality steel (similar to SAF 2205) Screw: stainless steel. steel 1.4408 and 1.4571 (CF-8M and 316Ti equivalents) Other parts in contact with the product: stainless steel. steel 1.4571 or similar (equivalent to 316Ti) Belt drive casing: Chrome-plated steel, powder coated. Drum drive: Flottweg SIMP-DRIVE Electric motor with V-belt drive. The starting and operating speeds are set via a frequency converter (frequency the converter is not included in the delivery for this item). Screw drive: A multi-stage planetary gearbox rotating together with the drum with an electric motor and a V-belt transmission. A special stage inside the gearbox provides differential speed control completely independent of the drum speed. Easy access to the gearbox located separately from the support bearings and outside the product processing area. Regulation of the differential rotation speed, as well as disconnection of the drives due to overload, is carried out electronically on the basis of an analog signal from a frequency converter proportional to the torque on the screw. (The frequency converter and regulator are not included in the scope of delivery for this item). Electric motor for the drum: Rated power: 30 kW. Voltage/Frequency: 400 V / 50 Hz. Speed: 3000 min-1. Protection class: IP 55. Overheating protection: 3 thermistors for thermal protection. Start: Chat frequency converter, Electric motor for screw: Rated power: 15 kW. Voltage/Frequency: 400 V / 50 Hz. Speed: 1500 min-1. Protection class: IP 55. Overheating protection: 3 thermistors for thermal protection. Start: Chat frequency converter.