High speed mixer AF
High speed mixers
AF series high-speed mixers are designed for mixing reagents in containers up to 200 l. Standard design of the electric motor: 230 /400V-50Hz - 1 or 3 phases; 4-pole 1400 rpm The screw diameter is 90 mm. Execution materials: flange for fastening to the tank is made of PP; cone type shaft and screw ("marine type"), made of stainless steel AISI 316 or steel, covered with a PP (polypropylene) casing. To seal against reagent vapors, a seal is installed between the shaft and the flange
Mixers:
| vendor code | Name | A type | L shaft, mm | D blades, mm | Execution | Rpm |
|---|---|---|---|---|---|---|
| AGT1241003 | Mixer AF 0.18 kW, 60СМ, РР, 3 phases (90) | 60-100 | 600 | 90 | PP | 1400 |
| AGT1242003 | Mixer AF 0.18 kW, 60CM, PP, 1 phase (90) | 60-100 | 600 | 90 | PP | 1400 |
| AGT1241303 | Mixer AF 0.18 kW, 70СМ, РР, 3 phases (90) | 100-200 | 700 | 90 | PP | 1400 |
| AGT1242303 | Mixer AF 0.18 kW, 70CM, PP, 1 phase (90) | 100-200 | 700 | 90 | PP | 1400 |
| AGT1241103 | Mixer AF 0.18 kW, 80СМ, РР, 3 phases (90) | 200 | 800 | 90 | PP | 1400 |
| AGT1242103 | Mixer AF 0.18 kW, 80CM, PP, 1 phase (90) | 200 | 800 | 90 | PP | 1400 |
| AGT1241001 | Mixer AF 0.18 kW, 60СМ, AISI316, 3 phases (90) | 60-100 | 600 | 90 | n /st AISI 316 | 1400 |
| AGT1242001 | Mixer AF 0.18 kW, 60CM, AISI316, 1 phase (90) | 60-100 | 600 | 90 | n /st AISI 316 | 1400 |
| AGT1241101 | Mixer AF 0.18 kW, 80CM, AISI316, 3 phases (90) | 200 | 800 | 90 | n /a AISI 316 | 1400 |
| AGT1242101 | Mixer AF 0.18 kW, 80CM, AISI316, 1 phase (90) | 200 | 800 | 90 | n /a AISI 316 | 1400 |
Sort by:
Sale
13936_22__CAR/SIC__EPDM__304__G60
Mechanical seal R-MG1 22, CAR/SIC, EPDM, 304, G60
14556_12__SIC/SIC__EPDM__304
Mechanical seal for Grundfos R-706H (CR) 12, SIC/SIC, EPDM, 304
