Pumps
Filter
Stock
Price
$
$
Serial number of the pump
Power supply

eTWIN PH-RX Dual Dispenser

Двойной дозатор eTWIN PH-RX

ETWIN PH-RX double pump dispenser.

ETWIN PH /RX "FULL" Package Contents(complete set, ready for installation):
1 PC. - eTWIN PH-RX 2-6 (5-5) 230V PVDF pump
2 pcs. - reagent injection valve 3/8 "- 1/2" PVDF
2 pcs. - PVDF reagent intake valve - Viton, with remote control
(with integrated reagent level sensor)
2 pcs. - 4x6 PE reagent supply hose (matt), 2 m
2 pcs. - 4x6 PVC fence hose (transparent), 4 m
Of these, it is used:
2 r.m. - for collecting the reagent;
2 r.m. - for the air bleed valve
1 PC. - PH level sensor with 5 m cable.
1 PC. - RX level sensor with 5 m cable.
1 PC. - calibration solution PH 7, 55ML
1 PC. - calibration solution PH 9, 55ML
1 PC. - calibration solution 650 mV, 55ML
2 pcs. - sensor holder 1/2 ", IN-LINE, PP
4 things. - clamping saddle DN50 - GF1 /2 ", PP
1 PC. - wall mounting platform for the pump
1 PC. - a set of dowels and screws for fastening
1 PC. - passport-instructions for installation and maintenance
1 PC. - warranty card

The main advantages and technical capabilities of eTWIN PH /RX FULL:

    • ETWIN is based on two new generation diaphragm metering pumps with a PVDF flow end, an integrated controller for measuring the pH level and Redox, which are integrated into a single compact housing, measuring 270x235x148 mm.
    • Fully Russified menu, I include a built-in system of prompts for the operator
    • PH Priority function - an effective software function to achieve savings in the consumption of dosed chemicals in the swimming pool
    • Pump capacity depending on the selected model: 2 l /h - 6 bar or 5 l /h - 5 bar
    • Measurement ranges: 0-14 pH; Rx: -1000 ÷ + 1400 mV; 0-100 ° C
    • Proportional dosing - set by default
    • Manual dosing mode
    • Dosing Pump Pre-Injection Procedure
    • Function: Password - is used to set protection "against access by third parties" for individual sections of the menu: SET POINT, CALIBRATION, SETTINGS and in PAUSE mode
    • Programmable time for setting the start delay of the metering pumps, independently for each measured parameter
    • Automatic diagnostic system for pH and Rx sensors during the calibration procedure
    • Flow sensor support (for all or selected measured parameter)
    • Reagent level sensor support (joint or separate operation mode)
    • PT100 temperature sensor support
    • Level sensors are already integrated in the chemical intake valves, which are included with the pump
    • Configurable alarms for level and flow sensors
    • Alarm for minimum and maximum thresholds
    • Overdose alarm - overdose on time
    • Relay output for alarm
    • Clock, timer (daily /weekly)
    • Analog output, 4-20 mA
    • Programmable non-contact relay outputs ON /OFF for measured parameters
    • Programmable relay output for connecting any external actuators by timer (for example, for dosing flocculant, algicide or for flushing the HYCHLOR chlorine sensor (SCLO 3) by time)
    • Dust and moisture protection class: IP65
vendor codeNameBack pressure performanceFlow part:
Pump head
l / hbarExecutionA type
CXB8010151ER ETWIN PH /RX 2-6 230V PVDF Pump
  • 2
  • 6
PVDF-Ceramic H
CXB8011151ER ETWIN PH /RX 5-5 230V PVDF Pump
  • 5
  • 5
PVDF-Ceramic H
Price:
$971.03
Pre-order only
- +
Price:
$971.03
Pre-order only
- +
Price:
$1,092.41
In stock
- +
Price:
$741.76
Pre-order only
- +
Price:
$741.76
Pre-order only
- +
0