Professional dosing and control system POOL GUARD MAX PH/RX/T/CL free/CL total (SONDA CL)
POOL GUARD MAX PH /RX /T /CLfree /CLtotal (SONDA CL) is a professional automatic proportional dosing and control system for PH, RedOx, free (CLfree) and total chlorine (CLtotal) concentrations in swimming pool water.
The dosing system is controlled by a liquid flow sensor, in the absence of flow, the system goes into standby mode.
MAIN ADVANTAGES: two new generation eSELECT-B2 controllers with 4 "color LCD display, russified menu, wide range of additional settings, easily accessible flow piping for servicing.
Dosing system POOL GUARD MAX PH /RX /T /CLfree /CLtotal (SONDA CL) is supplied mounted on a chemical-resistant plastic panel (900x600x8 mm), in a complete set, ready for installation and commissioning.
SPECIFICATIONS:
- The system is based on two eSELECT-B2 series liquid analyzers, with two independent pH /RedOx /Cl parameters to choose from in each, with a universal input power supply of 90–260V; proportional dosing pumps DLX-CC /M series and two potentiostatic sensors for free (0-2 mg /l) and total (0-20 mg /l) chlorine SONDA CL (organic /inorganic chlorine).
- Dosing delay when the system is turned on.
- Level sensor or flow sensor alarm.
- Setting the alarm for the concentration limits of pH / Cl levels (MIN / MAX).
- Dosing regimen: proportional to PROP.
- Support for PT100 temperature sensor.
- Automatic temperature compensation of pH.
- Pump performance: PH: 5 l / h; Cl: 15 l / h.
- Alarm ON /OFF (proximity relay) outputs.
- Electronic blocking of the settings made.
- Built-in electronic logbook for recording changes in measured parameters (optional).
- Measurement ranges: 0-14 pH; -1000 + 1400 mV; free chlorine 0-2 mg /l, total chlorine 0-20 mg /l, 0-100 ° C.
- Two independent ON / OFF outputs (non-contact relay) for each measured parameter.
- Two independent 4-20 mA outputs for each Set Point.
- Electronic clock (time, date), timer.
- Four programmable ON /OFF outputs (non-contact relay) for connecting a pump for dosing a flocculant or setting a "shock" chlorination by timer.
- Two LCD color displays with a diagonal of 4 ".
- RS 232 output (RS 485 via adapter - optional) for PC.
- Ingress protection class of controller and pumps: IP65.
- Easily accessible flow line for service.
- Russified menu.
DOSING SYSTEM CONFIGURATION: (SONDA CL + SONDA CL TOTAL) - configuration with potentiostatic sensors for free and total chlorine (organic /inorganic chlorine.
Dosing system composition:
1 PC. - pump DLX – CC /M 5-7 230V PVDF.
1 PC. - pump DLX – CC /M 15-4 230V PVDF.
2 pcs. - liquid analyzer ESELECT-B2 230V.
1 PC. - chlorine sensor SONDA CL, FIC /FOC, 0-2 mg /l.
1 PC. - chlorine sensor SONDA CL, TC, 0-20 mg /l.
2 pcs. - connecting cable for SONDA CL.
2 pcs. - reagent injection valve.
2 pcs. - reagent intake valve.
1 PC. - PH level sensor with 0.5 m cable.
1 PC. - RX level sensor with 0.5 m cable.
1 PC. - temperature sensor PT100, PVC.
2 pcs. - reagent level sensor with 2 m cable.
2 pcs. - sensor holder PH-CL (FS) with mounting kit.
1 PC. - calibration solution PH 7, 55ML.
1 PC. - calibration solution PH 9, 55ML.
1 PC. - calibration solution 650 mV, 55ML.
2 pcs. - reagent intake hose, 4x6, PVC, 2 lm
2 pcs. - reagent discharge hose, 4x6, PE, 2 lm
1 PC. - mounting panel 900x600x8 mm.
1 PC. - a set of instructions for installation and maintenance.
| vendor code | Name | Characteristic |
|---|---|---|
| QXB9000101ER | Dosing system POOL GUARD MAX PH /RX /CL /T /CL TOTAL | pH: 5 l / h; Cl: 15 l / h |
