Monitoring and control system PH-CL-F CONTROL PANEL
Control and regulation system PH-CL-F
PH-CL-F CONTROL PANEL is a pre-installed system for regulating and monitoring the pH level and the level of free (residual) chlorine in swimming pool water. The dosing control and management system is supplied pre-mounted on a plastic chemically resistant panel (400x600x8 mm), without dosing pumps (pumps and (or) other executing devices are selected according to the technical assignment).
Specifications:
- The system is based on the eSELECT-B2 liquid analyzer, with a universal input voltage of 90-260V, a flow-through potentiostatic sensor for free chlorine SONDA CL (organic /inorganic chlorine), a pH sensor and a holder for sensors PH-CL (FS) with a mounting kit, including a sensor flow.
- Measurement ranges: 0-14 pH; 0-2 (20) ppm (mg /L). Display resolution: 0.01 pH; 0.01 ppm. Dosing modes: constant ON /OFF or proportional PROP.
- Two independent ON / OFF outputs (non-contact relay) for each measured parameter. Two independent 4-20 mA outputs for each Set Point. Electronic clock (time, date), timer.
- The SONDA CL sensor operates in the 4-12 pH range and is compatible with the presence of isocyanuric acid, surfactants and flocculants in water, while maintaining a constant flow of 30-40 l /h (via the sensor holder), MAX temperature 45 ° C and MAX working back pressure in the system - 1 bar.
- SONDA CL sensor has an integrated automatic temperature compensation system.
- Dust and moisture protection class: IP65. Pre-wired (in box) for connecting one ON-OFF external device (e.g. dosing pump).
Dosing system delivery set:
- liquid analyzer eSELECT-B1 230V
- chlorine sensor SONDA CL, FIC / FOC, 0-20 (0-2) ppm
- PH level sensor with 0.5 m cable.
- sensor holder PH-CL (FS) with mounting kit
- connecting cable for SONDA CL
- calibration solution PH 9.55ML
- calibration solution PH 7,55ML
- mounting panel 450x600x8 mm
- set of instructions for installation and maintenance
| vendor code | Name | Characteristic |
|---|---|---|
| QPA6510212 | Dosing system PH – CL – F CONTROL, 0–20 ppm | - |
| QPA6510312 | Dosing system PH – CL – F CONTROL, 0–2 ppm | - |
This category does not contain any products.
Sale
13936_22__CAR/SIC__EPDM__304__G60
Mechanical seal R-MG1 22, CAR/SIC, EPDM, 304, G60
14556_12__SIC/SIC__EPDM__304
Mechanical seal for Grundfos R-706H (CR) 12, SIC/SIC, EPDM, 304
