Regulation and control system PH-RX-F CONTROL PANEL
PH control and monitoring system
PH-RX CONTROL is a pre-installed pH and RedOx control and monitoring system for swimming pools, complete with eSELECT-B2 liquid analyzer. The dosing control and management system is supplied pre-mounted on a plastic chemically resistant panel (400x600x8 mm), without dosing pumps (pumps and (or) other executing devices are selected according to the technical assignment).
Specifications:
- The system is based on a liquid analyzer of the eSELECT-B2 series, with two indicators of pH and RedOx, with a universal input mains voltage of 90-260V and a holder for PH-RX sensors with a mounting kit
- Measurement ranges: 0-14 pH; -1000 + 1400 mV RedOx
- Display resolution: 0.01 pH; 1 mV;
- Dosing modes: constant ON /OFF or proportional PROP
- Two independent ON /OFF outputs (proximity relay) for each measured parameter
- Two independent 4-20 mA outputs for each Set Point
- Electronic clock (time, date), timer
- Two programmable ON /OFF outputs (non-contact relay) for connecting a pump for dosing a flocculant or a timer-based shock chlorination unit
- Alarm ON /OFF output (proximity relay)
- Electronic locking of the settings made by password
- Built-in electronic logbook for recording changes in measured parameters (optional)
- RS 232 output (RS 485 via adapter - optional) for PC
- PC control software (optional)
- Dust and moisture protection class: IP65
- Pre-wired (in a box) for connecting two ON-OFF external devices (e.g. metering pumps)
Dosing system delivery set:
- liquid analyzer ESELECT-B2 230V
- PH level sensor with 0.5 m cable.
- level sensor RX with 0.5 m cable.
- PH-RX sensor holder with mounting kit
- calibration solution PH 7, 55ML
- calibration solution PH 9, 55ML
- calibration solution 650 mV, 55ML
- mounting panel 450x600x8 mm
vendor code | Name | Characteristic |
QPA5511012 |
Dosing system PH – RX – F CONTROL |
- |
This category does not contain any products.