PH Automatic Dosing Station - PH CONTROL 1
Dosing pump for measuring and dosing pH.
PH CONTROL 1 is an automatic proportional dosing and pH control station for swimming pools up to 500 m3.
Specifications:
- The station is based on a DLX PH-RX /MBB metering pump with built-in pH controllers.
- Wall-mounted anti-acid pump casing.
- Alarm for continuous dosing time, followed by shutdown of the dosing pump.
- Dosing delay when turning on the station.
- Level sensor or flow sensor alarm.
- Setting the pH limit alarm (MIN /MAX).
- Dosing modes: constant ON /OFF (with hysteresis setting) and proportional PROP.
- Pump capacity: 5 l /h - 7 bar.
- Measurement ranges: 0 ÷ 14 pH.
- Manual temperature compensation of pH.
- Dosing direction: "down" (acid) or "up" (alkali).
- Reagent flow /level sensor support.
- Protection class (pump): IP65.
Key Benefits: Simplified pump programming and calibration, simple operation, and readily available flow-through piping for service.
| A type | Performance, l /hour |
Pressure, bar |
pH | Price without VAT, (€) |
| PH CONTROL 1 | 5 | 7 | 0 ... 14 | 783 |
This category does not contain any products.
Sale
13936_22__CAR/SIC__EPDM__304__G60
Mechanical seal R-MG1 22, CAR/SIC, EPDM, 304, G60
14556_12__SIC/SIC__EPDM__304
Mechanical seal for Grundfos R-706H (CR) 12, SIC/SIC, EPDM, 304
