Control system for monitoring the levels of PH, RX and residual chlorine CL (A) -PH-RX-F CONTROL
Monitoring and control system CL (A) -PH-RX-F
CL (A) -PH-RX-F CONTROL - pre-installed system for regulation and monitoring of PH, RedOx levels and free (residual) chlorine in swimming pool water, complete with eSELECT-B3 liquid analyzer. The control system is supplied pre-assembled on a plastic chemically resistant panel (400x600x8 mm), without metering pumps (pumps and (or) other executing devices are selected according to the terms of reference).
Specifications:
- The system is based on an ESELECT-B3 liquid analyzer, with a universal input voltage of 90–260V, a SCLO 3 HYCHLOR flow amperometric free chlorine sensor (inorganic chlorine only), pH sensors, RedOx with a mounting kit, including a flow sensor.
- Measurement ranges: 0-14 pH; -1000 + 1400 mV RedOx; 0-2 ppm (mg /L). Display resolution: 0.01 pH; 1 mV; 0.01 ppm. Dosing modes: constant ON /OFF or proportional PROP.
- Dosing delay when the system is turned on. Level sensor or flow sensor alarm. Locking the settings made by password.
- Two independent ON /OFF outputs (non-contact relay) for each measured parameter. Two independent 4-20 mA outputs for each Set Point. Electronic clock (time, date), timer.
- Electronic locking of the settings made by password. Setting alarm for limit concentration of pH /Cl levels (MIN /MAX).
- Dust and moisture protection class: IP65. Pre-wired (in box) for connecting one ON-OFF external device (e.g. dosing pump).
Dosing system delivery set:
- liquid analyzer eSELECT-B3 230V
- chlorine sensor SCLO 3 (HYCHLOR)
- cable with adapter for chlorine sensor SCLO 3 (HYCHLOR)
- mounting kit for chlorine sensor SCLO 3 (HYCHLOR)
- mounting panel 450x600x8 mm
- PH level sensor with 0.5 m cable.
- level sensor RX with 0.5 m cable.
- calibration solution PH 7,55ML
- calibration solution PH 9.55ML
- calibration solution 650 mV, 55ML
- set of instructions for installation and maintenance
| vendor code | Name | Characteristic |
|---|---|---|
| QPA9Z11112 | Dosing system CL (A) -PH-RX-F CONTROL, 0-2 ppm | - |
This category does not contain any products.
Sale
13936_22__CAR/SIC__EPDM__304__G60
Mechanical seal R-MG1 22, CAR/SIC, EPDM, 304, G60
14556_12__SIC/SIC__EPDM__304
Mechanical seal for Grundfos R-706H (CR) 12, SIC/SIC, EPDM, 304
