ECONTROL Liquid Analyzers
eCONTROL is a liquid controller /analyzer for measuring and monitoring electrochemical parameters: pH level, RedOx (ORP), free and total organic or inorganic chlorine, as well as other parameters determined by ion-selective sensors (electrodes).
SPECIFICATIONS
- Microprocessor control.
- Informative LCD display with backlight
- Measurement ranges: 0-14 pH; –1000 +1400 mV; chlorine: 0-2 mg /l, 0-20 mg /l, 0-200 mg /l; ppm: 0-2 ppm, 0-20 ppm, 0-200 ppm; 0-100 ° C.
- Setting 2 independent Setpoint Points per Measured Parameter
- Dosing control modes: constant ON / OFF with hysteresis setting or proportional PROP.
- Choice of direction of dosing mode: direct or reverse
- Setting the start delay time for metering pumps
- 2 independent proportional ON /OFF outputs (proximity relay) with PWM mode
- Support for PT100 temperature sensor.
- Manual (25 ° C) or automatic temperature compensation (when connecting a PT100 temperature sensor)
- Alarm MAX. reagent concentration (optional)
- Alarm MIN. reagent concentration (optional)
- Alarm for continuous dosing time and not reaching the Set Point (optional)
- ON /OFF output (proximity relay) for alarm (optional)
- 4-20 mA output (optional)
- Galvanically isolated outputs
- Universal input voltage: 100-250V AC 50Hz.
- Dust and moisture protection class: IP65.
- Wall mount.
- External dimensions: 200x131x88 mm.
EXTERNAL DIMENSIONS
Sale
13936_22__CAR/SIC__EPDM__304__G60
Mechanical seal R-MG1 22, CAR/SIC, EPDM, 304, G60
14556_12__SIC/SIC__EPDM__304
Mechanical seal for Grundfos R-706H (CR) 12, SIC/SIC, EPDM, 304
