Dosing pump DLX PH-RX-CL /M
Features of ETATRON DLX pumps
- The pump casing is made of anti-acid plastic, and the control panel is additionally protected with a film that blocks UV radiation.
- The standard version (complete set) of the liquid end of ETATRON DLX pumps includes a PVDF (fluoroplastic) head equipped with double ball valves (except for models 2 l / h - 20 bar and 20 l / h - 3 bar). This makes it possible to dispense almost any aggressive reagents.
- Built-in controllers for pH, RedOx, chlorine and conductivity analysis allow for accurate proportional dosing. Additionally, you can install flow and level sensors.
- ETATRON DLX pumps have a wide range of models. Their performance ranges from 1 to 20 l / h. The models differ in the type of control, dosing mode and are selected according to the customer's requirements.
- The pumps are mounted on a wall.
- Protection against moisture and dust conforms to the IP65 class.
- Versatility of application. ETATRON DLX pumps can be used for water treatment and water purification, disinfection of water in swimming pools, electroplating, food and chemical industries.
Dosing pump with built-in pH / RedOx / Cl controller (optional).
Control type:Digital: 5 touch buttons to select the operating mode: OK, ESC, jump, more, less.
Indication:3 LEDs: power supply, pulse frequency, level sensor signaling or alarms.
Level sensor support:Yes, including support for an output flow sensor (sensors not included).
Con10ts of delivery:1 PC. - diaphragm metering pump. 2 lm - flexible PVC intake hose **. 2 lm - discharge hose made of pressure PE. 1 PC. - reagent intake valve. 1 PC. - reagent injection valve. 1 PC. - passport / instruction manual.
Measurement range: 0-14 pH; -1000 + 1400 mV; 0–20 ppm (mg /L). 4-20 mA output. Relay output ON /OFF for alarm. Automatic temperature compensation (with PT100 temperature sensor).
| Version | vendor code | Name | Back pressure performance | Flow part: Pump head | ||
|---|---|---|---|---|---|---|
| l / h | bar | Execution | A type | |||
| 0115 | PLX27222V8 | Electromagnetic dosing pump DLX PH-RX-CL /M 1-15 230V PVDF (1-15 /2-10 /3-5) |
|
|
PVDF-Ceramic | E |
| 0220 | PLX2703201 | Electromagnetic dosing pump DLX PH-RX-CL /M 2-20 230V |
|
|
PVC-Viton | C |
| 0507 | PLX27038V8 | Electromagnetic dosing pump DLX PH-RX-CL /M 5-7 230V PVDF (5-7 /6-5 /8-2) |
|
|
PVDF-Ceramic | E |
| 0810 | PLX27228V8 | Electromagnetic dosing pump DLX PH-RX-CL /M 8-10 230V PVDF (8-10 /10-7 /12-3) |
|
|
PVDF-Ceramic | E |
| 1504 | PLX27231V8 | Electromagnetic dosing pump DLX PH-RX-CL /M 15-4 230V PVDF |
|
|
PVDF-Ceramic | E |
| 2003 | PLX2722001 | Electromagnetic dosing pump DLX PH-RX-CL /M 20-3 230V |
|
|
PP-Viton | B |
Sort by:
Sale
13936_22__CAR/SIC__EPDM__304__G60
Mechanical seal R-MG1 22, CAR/SIC, EPDM, 304, G60
14556_12__SIC/SIC__EPDM__304
Mechanical seal for Grundfos R-706H (CR) 12, SIC/SIC, EPDM, 304
