Automatic pool station - POOL TOP GUARD PH / RX /
POOL TOP GUARD PH /RX /CL /T is a professional proportional dosing and control system for PH, RedOx and CL levels (concentration of free chlorine in water) for swimming pools.
The dosing system is controlled by a liquid flow sensor, in the absence of flow, the system goes into standby mode.
MAIN ADVANTAGES: a new generation eSELECT-B3 controller with a 4 ”color LCD display, a Russian menu, a wide range of additional settings, an easily accessible flow line for servicing.
Dosing system POOL TOP GUARD PH /RX /CL /T is supplied mounted on a chemically resistant plastic panel (900x600x8 mm), in a complete set, ready for installation and commissioning
SPECIFICATIONS:
- The system is based on a new generation controller eSELECTB 3, with three independent parameters pH /RX /Cl, with a universal input voltage of 90–260V; proportional metering pumps DLX series and potentiostatic free chlorine sensor SONDA CL.
- Dosing delay when the system is turned on.
- Level sensor or flow sensor alarm.
- Setting the alarm for the concentration limits of pH /Cl levels (MIN /MAX).
- Dosing regimen: proportional to PROP.
- Support for PT100 temperature sensor.
- Automatic temperature compensation of pH.
- Pump performance: PH: 5 l /h; Cl: 15 l /h.
- Measurement ranges: 0-14 pH; -1000 + 1400 mV; chlorine 0-2 or 0-20 ppm (mg /l), 0-100 ° C.
- Display resolution: 0.01 pH; 1 mV; 0.01 ppm; 0.1 ° C.
- Alarm ON /OFF (proximity relay) output.
- Built-in electronic logbook for recording changes in measured parameters (optional).
- RS 232 output (RS 485 via adapter - optional) for PC.
- PC control software (optional).
- Ingress protection class of controller and pumps: IP65.
- Easily accessible flow line for service.
- Two independent ON /OFF outputs (non-contact relay) for each measured parameter.
- Two independent 4-20 mA outputs for each Set Point.
- Electronic clock (time, date), timer.
- Electronic blocking of the settings made.
- Three programmable ON /OFF outputs (non-contact relay) for connecting a pump for dosing a flocculant or setting a "shock" chlorination by timer.
- Russified menu.
DOSING SYSTEM CONFIGURATION: (SONDA CL) - configuration with SONDA CL potentiostatic free chlorine sensor (organic /inorganic chlorine).
POOL TOP GUARD PH /RX /CL /T PANEL dosing system composition
1 PC. - pump DLX – CC /M 5-7 230V PVDF
1 PC. - pump DLX – CC /M 15-4 230V PVDF
1 PC. - liquid analyzer ESELECT-B3 230V
1 PC. - chlorine sensor SONDA CL, FIC /FOC, 0-20 (0-2) mg /l
1 PC. - connecting cable for SONDA CL
2 pcs. - reagent injection valve
2 pcs. - reagent intake valve
1 PC. - PH level sensor with 0.5 m cable.
1 PC. - RX level sensor with 0.5 m cable.
1 PC. - temperature sensor PT100, GLASS
2 pcs. - reagent level sensor with 2 m cable.
1 PC. - sensor holder PH-RX-CL (FS) with mounting kit
1 PC. - calibration solution PH 7, 55ML
1 PC. - calibration solution PH 9, 55ML
1 PC. - calibration solution 650 mV, 55ML
2 pcs. - reagent intake hose, 4x6, PVC, 2 lm
2 pcs. - reagent discharge hose, 4x6, PE, 2 lm
1 PC. - mounting panel 900x600x8 mm
1 PC. - a set of instructions for installation and maintenance
| vendor code | Name | Characteristic |
|---|---|---|
| QPA8M11238ER | Dosing system POOL TOP GUARD PH /RX /CL /T (SCL) | pH: 5 l /h; Cl: 15 l /h |
| QPA8M11338ER | Dosing system POOL TOP GUARD PH /RX /CL /T (SCL), 0-2 ppm | pH: 5 l /h; Cl: 15 l /h |
