WQ
Description:
Drainage pumps are used to pump clean or contaminated water from drainage wells, pits, pools and reservoirs. These pumps can be installed for permanent stationary operation or transported from place to place.
Such pumps are of10 equipped with a float switch that starts and stops them depending on the water level (in addition, modern models of leading pump manufacturers are equipped with protection against overheating and dry running). Portable WQ pumps are also designed for pumping water during reheating, for use in engineering systems of agricultural and industrial enterprises, etc.
Pumping process water free of solid particles and fibers
Drainage pumps WQ - pumps are designed for pumping drainage and groundwater from systems located in private houses or backyards, in agricultural and small industrial enterprises, etc.
- Consumption: from 10 to 300 m³ /hour.
- Head: from 7 to 35 m.
- Power: from 0.75 to 22 kW.
Characteristics:
- - the pumps are compact, do not create a lot of noise, do not consume a lot of energy, are available for main10ance and repair;
- - the ability to provide control over the level of water, electric current, overload and overheating of the engine;
- - depending on the level of runoff water, the float switch can automatically turn on or off the pump;
- - the pump head is regulated until the maximum performance is reached, which does not harm the engine;
- - there are two ways to install:
- - Installation with fixed connection.
- - Mobile installation.
WQ50-10-4
200WQ300-15-22
Application
Drainage pumps are used in any wastewater treatment system that is required in municipal services, chemical plants, mines and quarries, in the production of cement, etc.
- Pumping drainage and surface water
- Groundwater pumping
- Pumping process water free of solid particles and fibers
Working conditions
Normal and long-term operation of the pump is ensured under the following conditions:
- the average temperature should not exceed + 40 ° C;
- average density of liquid that is pumped 1000 ... 1200 kg /m3;
- frequency 50 Hz, voltage 380 V, permissible deviation of the supply voltage within ± 5% of the nominal.
Main settings
Performance charts
Drainage pumps WQ
| MODEL | CONSUMPTION (m3/hour) |
HEAD (m) |
POWER (kw) |
SPEED (rpm) |
DIAMETER (mm) |
CURRENT (IN) |
FREQUENCY (Hz) |
THE WEIGHT (kg) |
| 50WQ10-10-0.75 | 10 | 10 | 0.75 | 2900 | 50 | 380 | 50 | 21 |
| 50WQ15-7-0.1 | 15 | 7 | 0.1 | 50 | 26 | |||
| 50WQ20-15-1.5 | 20 | 15 | 1.5 | 50 | 55 | |||
| 65WQ25-10-1.5 | 25 | 10 | 1.5 | 65 | 58 | |||
| 50WQ15-25-2.2 | 15 | 25 | 2.2 | 50 | 56 | |||
| 65WQ25-15-2.2 | 25 | 15 | 2.2 | 65 | 60 | |||
| 65WQ37-13-3 | 37 | 13 | 3 | 65 | 70 | |||
| 85WQ43-13-3 | 43 | 13 | 3 | 80 | 85 | |||
| 65WQ25-30-4 | 25 | 30 | 4 | 65 | 85 | |||
| 80WQ40-15-4 | 40 | 15 | 4 | 80 | 90 | |||
| 100WQ110-10-5.5 | 110 | 10 | 5.5 | 1450 | 100 | 155 | ||
| 100WQ100-15-7.5 | 100 | 15 | 7.5 | 100 | 170 | |||
| 100WQ100-25-11 | 100 | 25 | 11 | 100 | 65 | |||
| 200WQ300-7-11 | 300 | 7 | 11 | 200 | 73 | |||
| 100WQ100-30-15 | 100 | 30 | 15 | 100 | 300 | |||
| 150WQ180-15-15 | 180 | 15 | 15 | 150 | 280 | |||
| 200WQ250-15-15 | 250 | 15 | 15 | 200 | 400 | |||
| 100WQ100-35-18.5 | 100 | 35 | 18.5 | 100 | 380 | |||
| 150WQ180-20-18.5 | 180 | 20 | 18.5 | 150 | 400 | |||
| 200WQ250-15-18.5 | 250 | 15 | 18.5 | 200 | 500 | |||
| 150WQ180-25-22 | 180 | 25 | 22 | 150 | 430 | |||
| 200WQ300-15-22 | 300 | 15 | 22 | 200 | 550 |
Installation of the drainage pump WQ
Installation with fixed connection
Mobile installation
