Rx level sensor without cable, glass
Without cable, cable connector for connection: DIN 19262, SN6.
RX level sensor without cable, glass - used in Etatron automatic water treatment stations. The sensor body with a diameter of 12 mm is made of glass filled with a transport electrolyte in the form of a gel, which guarantees operation at pressures up to 10 bar, supplied with a DIN 19262 /SN6 connector.
RX sensor specifications:
- Sensor height: 120 mm.
- Working range ± 2000 mV.
- Maximum working temperature: 0-60 degrees.
- Membrane: ceramics.
- Electrode: platinum.
- Sensor diameter: 12 mm.
- Electrolyte: electrolytic gel.
- Sensitivity: 59 + 3 mV /pH at 25 ° C.
- Connector type: BNC.
| Name | vendor code |
| Rx sensor, 5.5 bar - 80° C | AEL0004101 |
| Rx sensor,6.8 bar - 100° C | AEL0004201 |
| Rx sensor, 10bar - 130° С /16 bar -25° C | AEL0004601 |
Cleaning:
If the readings are unstable, when the sensor reads slowly or intermittently, it is possible to restore normal operation by cleaning if there are deposits on the electrodes. To do this, it is necessary to clean metal surfaces with a material of little abrasion, such as toothpaste.
Storage:
The sensor must not be allowed to dry out; during short-term storage, it may be placed in water.
This category does not contain any products.
Sale
13936_22__CAR/SIC__EPDM__304__G60
Mechanical seal R-MG1 22, CAR/SIC, EPDM, 304, G60
14556_12__SIC/SIC__EPDM__304
Mechanical seal for Grundfos R-706H (CR) 12, SIC/SIC, EPDM, 304
