- Home
- Pumps
- Dosing equipment
- Controllers (fluid analyzers)
- ESELECT and AG-SELECT high precision liquid analyzers
ESELECT-M 1 CD conductivity level controller
The eSELECT-M 1 CD controller is an advanced controller used to measure the conductivity level. This instrument is equipped with an LCD display with LED backlight. The controller body is made of acid-resistant plastic, which will significantly extend the period of its operation.
ESELECT-M 1 CD Liquid Analyzer Dimensions (Wall Mount): 121.5x120x56mm
SPECIFICATIONS:
- Universal input voltage 100-240V or 12-24V.
- Dust and water protection class: IP44.
- Measurement range: K1: 0-20 mS (0-100 mS - when using graphite sensors);
K5: 0-2.000 μS. - Display resolution: 0.01 pH; 1 mV; 0.01 ppm / 0.1 ppm; 0.1 ° C.
- Galvanically isolated 4-20 mA outputs.
- Setting the alarm for the concentration limits of the MIN /MAX levels.
- Dosing modes: constant ON /OFF and proportional PROP.
- Two independent outputs ON /OFF (contactless relay) for each parameter.
- Two independent 4-20 mA outputs for each Set Point.
- Clock, timer.
- Automatic temperature compensation (when connecting a PT100 sensor).
- Support for PT100 flow / level / temperature sensors (sensors not included).
| Name | vendor code |
| ESELECT-M 1 CD conductivity level controller 100-240V |
CXB5015101 |
| ESELECT-M 1 CD conductivity level controller 12-24V |
CXB5015201 |
This category does not contain any products.
Sale
13936_22__CAR/SIC__EPDM__304__G60
Mechanical seal R-MG1 22, CAR/SIC, EPDM, 304, G60
14556_12__SIC/SIC__EPDM__304
Mechanical seal for Grundfos R-706H (CR) 12, SIC/SIC, EPDM, 304
