Pumps for KAS SM
Monoblock centrifugal pumps SM are designed for pumping water, as well as any liquids similar to it in chemical composition, density and consistency. In addition, the pumps can handle liquids with a higher density than water, with the presence of suspended particles (for example: distillery stillage, mash).
Traditional areas of operation of devices such as SM are heating and water supply (both hot and cold). A function that monoblock pumps do perfectly well is maintaining the required level pressure (for example, interfloor).
Performance
Monoblock centrifugal pumps SM are designed for use in heating systems, cold and hot water supply, air conditioning, and other industrial applications.- head 55 m,
- productivity 72 m³ / h,
- maximum working pressure 10 bar,
- maximum temperature of the pumped-over liquid 120 ° С,
- flow path material: stainless steel AISI 304, AISI 316.
Applying
- Water supply
- Heating
- Ventilation and air conditioning
- Pressure rise
- Heating systems
- Refrigeration and refrigeration systems
- Irrigation
SM centrifugal pumps have shown themselves well in the alcohol industry, namely, for pumping stillage, mash.
Performance charts
Material specification
| Pump housing | Stainless steel AISI 304, AISI 316 |
| Pump shaft | |
| Working wheel | |
| Mechanical seal | Graphite / Ceramic / NBR (standard) Graphite / Ceramic / Viton (chemical version) |
Pump design SM 
| 1 Pump housing | 5 Impeller | 9 Flange | 13 Electric motor |
| 2 Bolt | 6 Mechanical seal | 10 Nut | 14 Stand |
| 3 Impeller nut | 7 O-ring | 11 Bolt | |
| 4 Spring washer | 8 Pump cover (bottom) | 12 Key |
Characteristics table
| Model (GB5662) |
Model (DIN24255) |
Power | Q | l / min | 50 | 100 | 150 | 200 | 250 | 300 | 333 | 400 | 450 | 500 | 550 | 600 | 650 | 700 | 800 | 1000 | 1200 |
| kWh | m3/hour | 3.0 | 6.0 | 9.0 | 12 | 15 | 18 | 20 | 24 | 27 | 30 | 33 | 36 | 39 | 42 | 48 | 60 | 72 | |||
| 50-32-160 / 2.2 | 50-32-160 / 2.2 | 2.2 |
Head (m) |
26 | 25.5 | 25 | 24 | 23.5 | 21.5 | 20 | 18 | ||||||||||
| 50-32-160 / 3.0 | 50-32-160 / 3.0 | 3.0 | 35 | 34 | 33 | 32 | 31 | 30 | 29 | 27 | |||||||||||
| 50-32-200 / 4.0 | 50-32-200 / 4.0 | 4.0 | 40.5 | 40 | 38.5 | 37.5 | 36 | 34 | 33 | 30 | |||||||||||
| 50-32-200 / 5.5 | 50-32-200 / 5.5 | 5.5 | 50 | 49.5 | 49 | 48.5 | 48 | 47.5 | 47 | 44.5 | |||||||||||
| 65-50-125 / 2.2 | 65-40-125 / 2.2 | 2.2 | 15.5 | 15 | 14.5 | 14 | 13 | 12 | 11 | 10 | 8 | 6 | |||||||||
| 65-50-125 / 3.0 | 65-40-125 / 3.0 | 3.0 | 21.8 | 21.5 | 21.3 | 21.1 | 20.7 | 20.2 | 19.5 | 18.4 | 16 | 14.5 | 12.5 | ||||||||
| 65-50-160 / 4.0 | 65-40-160 / 4.0 | 4.0 | 28.5 | 28 | 27.4 | 27.1 | 26.3 | 25.4 | 24.3 | 22.9 | 21.7 | 20.5 | 19 | ||||||||
| 65-50-160 / 5.5 | 65-40-160 / 5.5 | 5.5 | 36 | 35 | 34.5 | 33.8 | 33 | 32 | 31.5 | 31 | 30.5 | 29.8 | 29 | ||||||||
| 65-40-200 / 7.5 | 65-40-200 / 7.5 | 7.5 | 44.5 | 43.5 | 42.5 | 42 | 41.8 | 41 | 40 | 38.5 | 37 | 35 | 33 | ||||||||
| 65-40-200 / 9.2 | 65-40-200 / 9.2 | 9.2 | 53.5 | 52.8 | 52 | 51.5 | 51 | 50.5 | 50 | 49.5 | 49 | 47 | 45.5 | ||||||||
| 80-65-125 / 4.0 | 65-50-125 / 4.0 | 4.0 | 21.6 | 21.2 | 20.5 | 20 | 19.2 | 18.2 | 17.5 | 15.5 | 11 | 8 | |||||||||
| 80-65-125 / 5.5 | 65-50-125 / 5.5 | 5.5 | 25.6 | 25.4 | 24.9 | 24.5 | 23.8 | 23.3 | 22.6 | 21 | 19 | 14 | |||||||||
| 80-65-160 / 7.5 | 65-50-160 / 7.5 | 7.5 | 30 | 29.8 | 29.5 | 28.8 | 28 | 27 | 26.5 | 24.8 | 23 | 19 | |||||||||
| 80-65-160 / 9.2 | 65-50-160 / 9.2 | 9.2 | 37 | 36.5 | 36 | 35.3 | 34.5 | 34 | 33.8 | 32 | 30 | 27.5 | |||||||||
| 80-50-200 / 11 | 65-50-200 / 11 | 11 | 52 | 51 | 50 | 49.5 | 49 | 48.5 | 48 | 46 | 41 | 33 | |||||||||
| 80-50-200 / 15 | 65-50-200 / 15 | 15 | 55 | 54.8 | 54.5 | 54.3 | 54 | 53.5 | 51 | 51 | 46.8 | 40 | |||||||||
Pumps for stillage, mash
Sort by:
Sale
13936_22__CAR/SIC__EPDM__304__G60
Mechanical seal R-MG1 22, CAR/SIC, EPDM, 304, G60
14556_12__SIC/SIC__EPDM__304
Mechanical seal for Grundfos R-706H (CR) 12, SIC/SIC, EPDM, 304
