Vertical Semi-Submersible Pumps - IM
IM vertical centrifugal pumps
Centrifugal electric pumps
IM vertical centrifugal pumps Available in plastic, polypropylene (PP) or polyvinylidene fluoride (PVDF). IM pumps are highly efficient, suitable for stationary installations (the pump is submerged directly into the tank). They are driven by an electric motor (max. 3000 rpm) and a capacity that varies (depending on the model) from 6 to 170 m3 /h, and can transport liquids with a head of up to 40 m.
DEBEM vertical centrifugal pumps do not use internal mechanical seals, so wear problems are eliminated as much as possible. The operation of vertical centrifugal pumps is due to the impeller, which, rotating at a given speed, creates suction in the central duct and supply to the peripheral duct due to the centrifugal effect. The pumps are equipped with open impellers, the vertical pumps of the IM series can pump (in a continuous flow) very dirty liquids with a maximum viscosity of up to 500 cP (at 20 ° C) and with possible small suspended solids.
- The product is designed and manufactured in Italy;
- Polypropylene or PVDF version;
- Can be used with liquids with suspended particles;
- Suitable for continuous work.
Explanation of the designation of the IM pump
Example of pump marking:IM95P-V-0800-N
- IM95 - standard size.
- P - polypropylene casing (FC - fiberglass reinforced PVDF casing).
- V - O-ring from Viton (D - from EPDM).
- 0800 - the length of the immersion part is 800 mm (it can also be 250, 500, 1000 and 1250 mm).
- N - three-phase motor (M - single-phase, A - explosion-proof ATEX standard).
Installation type IM pump
