Sulfuric acid pump
Dosing of sulfuric acid can be done with metering pumps from ETATRON D.S. For the dosage of sulfuric acid, pumps are used - solenoid type (PKX, DLX, BT, eONE), membrane motor type (D, ST-D) and plunger type (P, ST-P).
In the case of dosage of sulfuric acid, it is necessary to do the following manipulations with the dosing pump:
- It is necessary to pick up pipes, instead of PVC, install polyethylene pipes.
- To start dosing sulfuric acid, the pump must be dry, for this you need to remove water from the pumping part, because water reacts with sulfuric acid, and a large amount of gas is formed, and this can lead to damage to the pump, valves and pumping part.
This category does not contain any products.
Sale
13936_22__CAR/SIC__EPDM__304__G60
Mechanical seal R-MG1 22, CAR/SIC, EPDM, 304, G60
14556_12__SIC/SIC__EPDM__304
Mechanical seal for Grundfos R-706H (CR) 12, SIC/SIC, EPDM, 304
