Amperometric holder with chlorine sensor SCLO 3 HYCHLOR
Connection: 1/2 "nipple for 10x14 hose.
SCLO 3 HYCHLOR flow amperometric free (residual) chlorine sensor, complete with flow sensor and built-in injection valve (for supplying sensor cleaner). The sensor is designed to work with sodium hypochlorite (attention - only inorganic chlorine).
Supplied assembled, complete with: flow regulator, chlorine sensor, flow sensor, hose, cleaning solution for a copper electrode. Built-in sampling nipple and injection valve for feeding measuring sensor.
Installation of 2 probes (pH and RedOx levels, 12 mm in diameter) is provided, a place for installing a temperature sensor and flow sensor.
For proper operation of the SCLO 3 HYCHLOR chlorine sensor, a constant flow of 40-60 is required l /hour.
SCLO 3 HYCHLOR specifications:
- Measuring range CL2: 0-2 mg /l. Constant value between 3 pH and 6 pH for measurement free chlorine (CL2). More than 6 pH are measured by chloramines NH2CL.
- Stable measurement of free inorganic chlorine in water: in the 6-8 pH range.
- Measurement type: galvanometric.
- Chlorine sensor electrodes materials: Platinum / Copper.
- Maximum running water temperature up to 45 ° C.
- Maximum system back pressure: up to 5 bar.
- Required water flow: 40-60 l / h.
- Hose connection: 1/2 "nipple for 10x14 hose (inner diameter 10 mm).
- Connection: flow sensor, 2 electrodes (pH and RedOx), 1 temperature sensor.
- Execution material: plexiglass / polypropylene weight.
- Weight: 1.3 kg.
- Dimensions: 200x190x50 mm.
| Name | Controllers / pumps | vendor code |
| Chlorine sensor SCLO 3 HYCHLOR Cl + pH-Rx-T two-wireth |
AG-Select - eSELECT - eCONTROL - DLX (B) pH-Rx-Cl / M - BT pH-Rx-Cl / M - eONE PLUS | SPS0002201 |
| Chlorine sensor SCLO 3 HYCHLOR Cl + pH-Rx-T three-wire |
R - B - eMULTICONTROL | SPS0002203 |
This category does not contain any products.
Sale
13936_22__CAR/SIC__EPDM__304__G60
Mechanical seal R-MG1 22, CAR/SIC, EPDM, 304, G60
14556_12__SIC/SIC__EPDM__304
Mechanical seal for Grundfos R-706H (CR) 12, SIC/SIC, EPDM, 304
