Dosing pump DLX with power consumption 12V /24V
Features of ETATRON DLX pumps
- The pump casing is made of anti-acid plastic, and the control panel is additionally protected with a film that blocks UV radiation.
- The standard version (complete set) of the liquid end of ETATRON DLX pumps includes a PVDF (fluoroplastic) head equipped with double ball valves (except for models 2 l /h - 20 bar and 20 l /h - 3 bar). This makes it possible to dispense almost any aggressive reagents.
- Built-in controllers for pH, RedOx, chlorine and conductivity analysis allow for accurate proportional dosing. Additionally, you can install flow and level sensors.
- ETATRON DLX pumps have a wide range of models. Their performance ranges from 1 to 20 l /h. The models differ in the type of control, dosing mode and are selected according to the customer's requirements.
- The pumps are mounted on a wall.
- Protection against moisture and dust conforms to the IP65 class.
- Versatility of application. ETATRON DLX pumps can be used for water treatment and water purification, disinfection of water in swimming pools, electroplating, food and chemical industries.
Microprocessor controlled diaphragm pump.
Dosing regimen:Proportional PROP. from an external signal 4-20 mA; permanent ON-OFF.
Control type:Digital: 5 touch buttons to select the operating mode: mA /pulse, Function, ENTER, more, less.
Indication:8 LEDs: pulse frequency, level sensor signaling, operating mode: manual or 4-20 mA; display mode: pulses /incoming current; Min /Max set points.
Con10ts of delivery:1 PC. - diaphragm metering pump. 2 lm - flexible PVC intake hose **. 2 lm - discharge hose made of pressure PE. 1 PC. - reagent intake valve. 1 PC. - reagent injection valve. 1 PC. - passport / instruction manual.
Possibility to select a reversible dosing mode: 4 mA - MIN; 20 mA - MAX or 4 mA - MAX; 20 mA - MIN. At10tion! When the power supply is cut off in the Manual operating mode and when the power supply is turned back on, the pump will automatically switch to METER operating mode (from the 4-20 mA input signal).
| Version | vendor code | Name | Back pressure performance | Flow part: Pump head | ||
|---|---|---|---|---|---|---|
| l / h | bar | Execution | A type | |||
| 0115 | PLX08222V8 | Dosing pump DLX-CC /M 1-15 230V PVDF (1-15 /2-10 /3-5) |
|
|
PVDF-Ceramic | E |
| 0220 | PLX0803201 | Dosing pump DLX-CC /M 2-20 230V |
|
|
PVC-Viton | C |
| 0507 | PLX08038V8 | Dosing pump DLX-CC /M 5-7 230V PVDF (5-7 /6-5 /8-2) |
|
|
PVDF-Ceramic | E |
| 0810 | PLX08228V8 | Dosing pump DLX-CC /M 8-10 230V PVDF (8-10 /10-7 /12-3) |
|
|
PVDF-Ceramic | E |
| 1504 | PLX08231V8 | Dosing pump DLX-CC /M 15-4 230V PVDF |
|
|
PVDF-Ceramic | E |
| 2003 | PLX0822001 | Dosing pump DLX-CC /M 20-3 230V |
|
|
PP-Viton | B |
