Double pump eTWIN PH-CL
eTWIN is an easy-to-use pH and free chlorine dosing and monitoring station for swimming pools up to 500 m3, consisting of two diaphragm dosing pumps and a controller integrated into one housing.
ETWIN PH-CL "STD" Package Contents:1 PC. - eTWIN PH-CL 2-6 (5-5) 230V PVDF pump
2 pcs. - reagent injection valve 3/8 "- 1/2" PVDF
2 pcs. - PVDF reagent intake valve - Viton, with remote control
(with integrated reagent level sensor)
2 pcs. - 4x6 PE reagent supply hose (matt), 2 m
2 pcs. - 4x6 PVC fence hose (transparent), 4 m
Of these, it is used:
2 r.m. - for collecting the reagent;
2 r.m. - for the air bleed valve
1 PC. - wall mounting platform for the pump
1 PC. - a set of dowels and screws for fastening
1 PC. - passport-instructions for installation and maintenance
1 PC. - warranty card
The main advantages and functional technical capabilities of the eTWIN PH-CL STD:
- At the heart of the eTWIN dosing pump are two electromagnetic dosing pumps with new generation solenoids and a liquid analyzer for measuring pH and free chlorine (ppm - in mg /l), which are integrated in a compact housing with dimensions: 270 x 235 x 148 mm.
- Russified Menu with a system of prompts on the display
- Priority pH - economical and efficient dosing of chemicals
- Pump performance: pH: 2 l /h - 6 bar; Cl: 2 l /h - 6 bar or pH: 5 l /h - 5 bar; Cl: 5 l /h - 5 bar depending on the selected model
- Measurement ranges: 0-14 pH; chlorine (free or total): PPM (mg /l): 0 ÷ 2, 0 ÷ 10, 0 ÷ 20, 0 ÷ 200; 0-100 ° C
- Proportional dosing (set by default)
- Manual dosing mode
- Pump pre-injection mode
- Possibility of setting a password for protection "from third parties" on separate sections of the menu: PAUSE, CALIBRATION, SET POINT, SETTINGS
- Configurable pump start delay time (for each measured parameter)
- Automatic diagnostics system for pH sensors during calibration
- Support for amperometric free chlorine sensor SCLO 3 (HYCHLOR)
- Supports SONDA CL ion selective chlorine sensor (free or total chlorine)
- Flow sensor support (for all or selected measured parameter)
- Reagent level sensor support (joint or separate operation mode)
- PT100 temperature sensor support (for pH temperature compensation)
- Chemical intake valve with integrated level sensors (included in delivery)
- Level sensor and flow sensor alarms
- MIN and MAX alarm for threshold values
- Overdose alarm by time
- Relay output for alarm
- Electronic clock (time and date), timer
- Output, 4-20 mA
- Relay outputs ON-OFF for measured parameters
- Relay output for connecting external actuators by timer (for example, dosing of flocculant /algicide or rinsing the HYCHLOR chlorine sensor (SCLO 3) by time)
- Dust and moisture protection class: IP65
| vendor code | Name | Back pressure performance | Flow part: Pump head | ||
|---|---|---|---|---|---|
| l / h | bar | Execution | A type | ||
| CXB8010201ER | ETWIN PH-CL 2-6 230V PVDF Pump |
|
|
PVDF-Ceramic | H |
| CXB8011201ER | ETWIN PH-CL 5-5 230V PVDF Pump |
|
|
PVDF-Ceramic | H |
