Pumps

Automatic pool station - POOL TOP GUARD PH / RX /

POOL TOP GUARD PH/RX/CL/T

POOL TOP GUARD PH /RX /CL /T is a professional proportional dosing and control system for PH, RedOx and CL levels (concentration of free chlorine in water) for swimming pools.

The dosing system is controlled by a liquid flow sensor, in the absence of flow, the system goes into standby mode.

MAIN ADVANTAGES: a new generation eSELECT-B3 controller with a 4 ”color LCD display, a Russian menu, a wide range of additional settings, an easily accessible flow line for servicing.

Dosing system POOL TOP GUARD PH /RX /CL /T is supplied mounted on a chemically resistant plastic panel (900x600x8 mm), in a complete set, ready for installation and commissioning

SPECIFICATIONS:

  • The system is based on a new generation controller eSELECTB 3, with three independent parameters pH /RX /Cl, with a universal input voltage of 90–260V; proportional metering pumps DLX series and potentiostatic free chlorine sensor SONDA CL.
  • Dosing delay when the system is turned on.
  • Level sensor or flow sensor alarm.
  • Setting the alarm for the concentration limits of pH /Cl levels (MIN /MAX).
  • Dosing regimen: proportional to PROP.
  • Support for PT100 temperature sensor.
  • Automatic temperature compensation of pH.
  • Pump performance: PH: 5 l /h; Cl: 15 l /h.
  • Measurement ranges: 0-14 pH; -1000 + 1400 mV; chlorine 0-2 or 0-20 ppm (mg /l), 0-100 ° C.
  • Display resolution: 0.01 pH; 1 mV; 0.01 ppm; 0.1 ° C.
  • Alarm ON /OFF (proximity relay) output.
  • Built-in electronic logbook for recording changes in measured parameters (optional).
  • RS 232 output (RS 485 via adapter - optional) for PC.
  • PC control software (optional).
  • Ingress protection class of controller and pumps: IP65.
  • Easily accessible flow line for service.
  • Two independent ON /OFF outputs (non-contact relay) for each measured parameter.
  • Two independent 4-20 mA outputs for each Set Point.
  • Electronic clock (time, date), timer.
  • Electronic blocking of the settings made.
  • Three programmable ON /OFF outputs (non-contact relay) for connecting a pump for dosing a flocculant or setting a "shock" chlorination by timer.
  • Russified menu.

DOSING SYSTEM CONFIGURATION: (SONDA CL) - configuration with SONDA CL potentiostatic free chlorine sensor (organic /inorganic chlorine).

POOL TOP GUARD PH /RX /CL /T PANEL dosing system composition

1 PC. - pump DLX – CC /M 5-7 230V PVDF
1 PC. - pump DLX – CC /M 15-4 230V PVDF
1 PC. - liquid analyzer ESELECT-B3 230V
1 PC. - chlorine sensor SONDA CL, FIC /FOC, 0-20 (0-2) mg /l
1 PC. - connecting cable for SONDA CL
2 pcs. - reagent injection valve
2 pcs. - reagent intake valve
1 PC. - PH level sensor with 0.5 m cable.
1 PC. - RX level sensor with 0.5 m cable.
1 PC. - temperature sensor PT100, GLASS
2 pcs. - reagent level sensor with 2 m cable.
1 PC. - sensor holder PH-RX-CL (FS) with mounting kit
1 PC. - calibration solution PH 7, 55ML
1 PC. - calibration solution PH 9, 55ML
1 PC. - calibration solution 650 mV, 55ML
2 pcs. - reagent intake hose, 4x6, PVC, 2 lm
2 pcs. - reagent discharge hose, 4x6, PE, 2 lm
1 PC. - mounting panel 900x600x8 mm
1 PC. - a set of instructions for installation and maintenance

vendor codeNameCharacteristic
QPA8M11238ER Dosing system POOL TOP GUARD PH /RX /CL /T (SCL) pH: 5 l /h; Cl: 15 l /h
QPA8M11338ER Dosing system POOL TOP GUARD PH /RX /CL /T (SCL), 0-2 ppm pH: 5 l /h; Cl: 15 l /h
This category does not contain any products.
Sale
Price:
$7,182.33
Pre-order only
- +
13936_22__CAR/SIC__EPDM__304__G60
Mechanical seal R-MG1 22, CAR/SIC, EPDM, 304, G60
Price:
$39.53
Pre-order only
- +
Price:
$90.21
Pre-order only
- +
Price:
On request
Pre-order only
- +
Price:
On request
Pre-order only
- +
0
Select site language:
deuusapolrus