Spare parts for TR barrel pumps
With long-term operation of barrel pumps, it becomes necessary to replace some spare parts. As a rule, these are ordinary cuffs (seals).
Before proceeding with the replacement of spare parts, it is necessary to rinse it in the barrel pump by pumping it with a cleaning liquid. Also, the drum pump should be checked for leaks every 40 hours of operation. The drum pump impeller should be cleaned every 200 hours of operation. All these manipulations must be carried out by specially trained specialists.
The DEBEM drum pump is completely demountable and all parts are easy to replace if necessary.
- 1. Baffle holder
- 2. Outer pipe
- 3. Retainer for the suction channel
- 4. Deflector
- 5. Impeller
- 6. Suction channel
- 7. Clutch, engine side
- 8. Spring ring
- 9. Bearing
- 10. Bearing washer
- 11. Bearing locating flange
- 12. O-ring
- 13. Shaft
- 14. Upper inner tube
- 15. Spacer sleeve
- 16. Lock nut retainer
- 17. Coupling locknut
- 18. Pump support
- 19. Hose connection
- 20. Gasket
- 21. Lower inner tube
- 22. Middle centering sleeve
- 23.-
- 24. Identification plate
Sort by:
Sale
13936_22__CAR/SIC__EPDM__304__G60
Mechanical seal R-MG1 22, CAR/SIC, EPDM, 304, G60
14556_12__SIC/SIC__EPDM__304
Mechanical seal for Grundfos R-706H (CR) 12, SIC/SIC, EPDM, 304
