Pumps

ECONTROL 1 pH /RedOx /Chlorine /PPM controller

Контроллер eCONTROL 1 уровня рН / RedOx / Хлора / PPM

ECONTROL 1 controller for measurement and control of electrochemical parameters: pH, Rx (ORP), free and total organic or inorganic chlorine CL, as well as other parameters determined by PPM ion-selective sensors.

SPECIFICATIONS

  • Microprocessor control.
  • Informative LCD display with backlight
  • Measurement ranges: 0-14 pH; –1000 +1400 mV; chlorine: 0-2 mg / l, 0-20 mg / l, 0-200 mg / l; ppm: 0-2 ppm, 0-20 ppm, 0-200 ppm; 0-100 ° C.
  • Setting 2 independent Setpoint Points per Measured Parameter
  • Dosing control modes: constant ON / OFF with hysteresis setting or proportional PROP.
  • Choice of direction of dosing mode: direct or reverse
  • Setting the start delay time for metering pumps
  • 2 independent proportional ON / OFF outputs (proximity relay) with PWM mode
  • Support for PT100 temperature sensor.
  • Manual (25 ° C) or automatic temperature compensation (when connecting a PT100 temperature sensor)
  • Alarm MAX. reagent concentration (optional)
  • Alarm MIN. reagent concentration (optional)
  • Alarm for continuous dosing time and not reaching the Set Point (optional)
  • ON / OFF output (proximity relay) for alarm (optional)
  • 4-20 mA output (optional)
  • Galvanically isolated outputs
  • Universal input voltage: 100-250V AC 50Hz.
  • Dust and moisture protection class: IP65.
  • Wall mount.
  • External dimensions: 200x131x88 mm.
Name vendor code
ECONTROL 1 Liquid Analyzers CXB7000101
This category does not contain any products.
Sale
Price:
$7,182.33
Pre-order only
- +
13936_22__CAR/SIC__EPDM__304__G60
Mechanical seal R-MG1 22, CAR/SIC, EPDM, 304, G60
Price:
$39.53
Pre-order only
- +
Price:
$90.21
Pre-order only
- +
Price:
On request
Pre-order only
- +
Price:
On request
Pre-order only
- +
0
Select site language:
deuusapolrus