DLX VFT /MBB dosing pump from flow meter
Features of ETATRON DLX pumps
- The pump casing is made of anti-acid plastic, and the control panel is additionally protected with a film that blocks UV radiation.
- The standard version (complete set) of the liquid end of ETATRON DLX pumps includes a PVDF (fluoroplastic) head equipped with double ball valves (except for models 2 l / h - 20 bar and 20 l / h - 3 bar). This makes it possible to dispense almost any aggressive reagents.
- Built-in controllers for pH, RedOx, chlorine and conductivity analysis allow for accurate proportional dosing. Additionally, you can install flow and level sensors.
- ETATRON DLX pumps have a wide range of models. Their performance ranges from 1 to 20 l / h. The models differ in the type of control, dosing mode and are selected according to the customer's requirements.
- The pumps are mounted on a wall.
- Protection against moisture and dust conforms to the IP65 class.
- Versatility of application. ETATRON DLX pumps can be used for water treatment and water purification, disinfection of water in swimming pools, electroplating, food and chemical industries.
Dosing pump proportional dosing from an external impulse.
Dosing regimen:Permanent ON-OFF. Proportional PROP. Modes: multiplication 1xN, multiplication with memory 1xN (M), division 1: N.
Control type:Digital: 4 touch buttons operating modes: START / STOP, F (Functions), more, less.
Indication:5 LEDs: pulse frequency, modes: ON-OFF, 1xN, 1xN (M), 1: N.
Con10ts of delivery:1 PC. - diaphragm metering pump. 2 lm - flexible PVC intake hose **. 2 lm - discharge hose made of pressure PE. 1 PC. - reagent intake valve. 1 PC. - reagent injection valve. 1 PC. - passport / instruction manual.
Relay output. This relay will be closed (NC) when the memory buffer overflows in 1xN (M) mode. Characteristics: 1 pole, 250V, 5A (resistive load).
| Version | vendor code | Name | Back pressure performance | Flow part: Pump head | ||
|---|---|---|---|---|---|---|
| l / h | bar | Execution | A type | |||
| 0115 | PLX39222V8 | Diaphragm pump DLX-VFT /MBB 1-15 230V PVDF (1-15 /2-10 /3-5) |
|
|
PVDF-Ceramic | E |
| 0220 | PLX3903201 | Diaphragm pump DLX-VFT /MBB 2-20 230V |
|
|
PVC-Viton | C |
| 0507 | PLX39038V8 | Diaphragm pump DLX-VFT /MBB 5-7 230V PVDF (5-7 /6-5 /8-2) |
|
|
PVDF-Ceramic | E |
| 0810 | PLX39228V8 | Diaphragm pump DLX-VFT /MBB 8-10 230V PVDF (8-10 /10-7 /12-3) |
|
|
PVDF-Ceramic | E |
| 1504 | PLX39231V8 | Diaphragm pump DLX-VFT /MBB 15-4 230V PVDF |
|
|
PVDF-Ceramic | E |
| 2003 | PLX3922001 | Diaphragm pump DLX-VFT /MBB 20-3 230V |
|
|
PP-Viton | B |
Sort by:
Sale
13936_22__CAR/SIC__EPDM__304__G60
Mechanical seal R-MG1 22, CAR/SIC, EPDM, 304, G60
14556_12__SIC/SIC__EPDM__304
Mechanical seal for Grundfos R-706H (CR) 12, SIC/SIC, EPDM, 304
