Automatic control and dosing station PH and RX - POOL GUARD 1 PH/RX
POOL GUARD 1 PH /RX is an automatic proportional dosing and control system for PH and RX levels (RedOx - oxidation-reduction potential) for swimming pools up to 500 m3.
The dosing station is controlled by a liquid flow sensor (included in the kit); if there is no flow, the system goes into standby mode.
Automatic control and dosing station Pool Guard 1 PH /RX - carries out water treatment of the pool by: measuring and regulating the indicator of redox potential (RX) - dosing of chlorine; measurement and regulation of the pH value; water flow measurement to shut off outputs in case of no flow.
The POOL GUARD 1 PH /RX dosing system is supplied mounted on a chemically resistant plastic panel (450x600x8 mm), in a complete set, ready for installation and commissioning. All major probes and sensors are installed in the flowcell.
SPECIFICATIONS:
- The system is based on DLX PH-RX /MBB dosing pumps with optional integrated pH /RedOx controllers.
- Alarm for continuous dosing time, followed by shutdown of dosing pumps.
- Dosing delay when the system is turned on.
- Level sensor (flow sensor) alarm.
- Setting the alarm for the maximum concentration of reagents (MIN /MAX levels).
- Dosing modes: constant ON /OFF and proportional PROP. Built-in functions:
- Alarm for continuous dosing time, followed by shutdown of dosing pumps.
- Dosing delay when turning on the station.
- Alarm and shutdown of the station by level sensors (included) of the reagent in the tanks.
- Alarm setting for chemical concentration limits reagents (MIN /MAX levels).
- Dosing modes: constant "ON / OFF" and proportional "PROP".
- Setting the hysteresis.
- The dosing station is controlled by a liquid flow sensor (included in the kit), if there is no flow, the system goes into standby mode "STAND BY", followed by indication on the LCD displays of the pumps.
Inputs / Outputs:
- pH /RX inputs - BNC connectors, input impedance>10 ^ 12 Ω.
- 2 inputs "LEV" for level sensor SPDT contact 5 V / 5 mA.
- "FLOW" input for connection to a pump switching relay or a flow sensor (SPDT pin 5 V /5 mA).
- Optional outputs: alarm relay and RS232 serial port.
POOL GUARD 1 PH /RX dosing system composition
2 pcs. - pump DLX PH-RX /MBB 5-7 230V
1 PC. - PH level sensor with 5 m cable.
1 PC. - RX level sensor with 5 m cable.
2 pcs. - reagent level sensor with 2 m cable.
1 PC. - device for filtering KIT –PH /RX
1 PC. - a set of instructions for installation and maintenance
1 PC. - calibration solution PH 7, 55ML
1 PC. - calibration solution PH 9, 55ML
1 PC. - calibration solution RX 475 mV, 55ML
2 pcs. - reagent injection valve
2 pcs. - reagent intake filter
2 pcs. - reagent intake hose, 4x6, PVC, 2 lm
2 pcs. - reagent discharge hose, 4x6, PE, 2 lm
| vendor code | Name | Characteristic |
|---|---|---|
| QPA5Q11027ER | Dosing system POOL GUARD 1 PH /RX | pH: 5 l / h; Cl: 5 l / h |
