WQK
Drainage pumps WQK series with cutterbar- these are centrifugal pumps, equipped with a system for grinding large particles and fibers, installed at the suction. Pumps are not subject to clogging and blockage.
The advantages of the pumps are reliability, high performance, low energy consumption, and the cutter mechanism provides the ability to pump media containing paper and other long-fiber particles.
The grinder pump is ideal for use in systems for pumping liquids from remote areas, detached buildings, utilities, and more.
This type of pump is not well suited for pumping liquids with a high suspended sand con10t.
Characteristic
- drainage pumps equipped withcutting mechanism,can cut waste such as cloth, paper, etc .;
- closed impeller with double impeller;
- the rotor shaft is highly resistant to wear and corrosion;
- double mechanical seal increases the reliability of the pump;
- the pumps are compact, easy to operate and maintain.
Characteristic
Drainage pump WQK anti-clogging design(cutting mechanism) , are widely used in industry, agricultural irrigation, mining, construction, municipal services, etc. They are ideal for pumping out dirty water, waste water with long fibers, faecal water.
Working conditions
Normal and long-term operation of the pump is ensured under the following conditions: - the average temperature should not exceed + 40 ° C;
- the average density of the liquid, which is pumped over 1000 ... 1200 kg /m3;
- frequency 50 Hz, voltage 380 V; permissible deviation of the supply voltage within ± 10% of the nominal.
Main settings
Performance diagram
| MODEL | VOLTAGE (V /Hz) |
DIAMETER (mm) |
CONSUMPTION (m3/hour) |
HEAD (m) |
POWER (kw) |
SPEED (rpm) |
| WQK 25-7-1.5 | 380/50 | 50 | 25 | 7 | 1.5 | 2860 |
| WQK 25-10-2.2 | 380/50 | 50 | 25 | 10 | 2.2 | 2860 |
| WQK 35-10-3 | 380/50 | 70 | 35 | 10 | 3 | 2860 |
| WQK 50-10-4 | 380/50 | 100 | 50 | 10 | 4 | 2860 |
| WQK 70-10-5.5 | 380/50 | 166 | 70 | 10 | 5.5 | 2860 |
