+7 929 510-01-36
$0
0
usa
deupolrus
  • Contacts
    • +7 929 510-01-36

    info@sp-teploobmen.ru

    Mon—Fri 09:00—18:00
    0
    $0
    +7 929 510-01-36
    telegram viber
    Pumps

    Brands

    Water Treatment Station - POOL eTWIN PH / CL (SCLO3 HYCHLOR)

    Станция обработки воды POOL eTWIN PH/CL

    POOL eTWIN PH /CL water treatment station

    POOL eTWIN PH /CL (SCLO3 HYCHLOR) is an automatic dosing and control system for PH and CL (free chlorine SCLO3 HYCHLOR) for swimming pools.

    Specifications:

    • Free Chlorine Measurement and Regulation - Chlorine Dosing
    • PH measurement and regulation
    • Water flow measurement to shut off the outputs in the absence of flow
    • Temperature sensor (PT100) allows automatic temperature compensation to be taken into account - optional.
    • The system is based on eTWIN PDP PH-CL metering pumps with integrated pH /Cl controllers and SCLO 3 HYCHLOR flow-through amperometric free chlorine sensor.
    • Dosing delay when the system is turned on.
    • Level sensor or flow sensor alarm.
    • Setting the alarm for the concentration limits of pH /Cl levels (MIN /MAX).
    • Dosing modes: constant ON /OFF and proportional PROP.
    • Setting the hysteresis.
    • Pump capacity: 3 l /h - 1.5 bar.
    • Measurement ranges: 0-14 pH 0-10 ppm (mg /l).
    • Protection class (pumps): IP65.
    • Support for flow sensor and reagent level sensor.

    Inputs /Outputs:

    - pH input.
    - Cl input - 4-pin connector.
    - 2 inputs "LEV" for level sensor SPDT contact 5 V /5 mA.
    - Input "FLOW" of the flow sensor (SPDT pin 5 V /5 mA).
    - Output 4-20 mA.
    - Relay output ON /OFF for alarm.

    POOL eTWIN PH /CL Dispensing System Composition [SCLO3 HYCHLOR]

    1 PC. - eTWIN PDP 0301 230V PVDF Pump
    1 PC. - PH level sensor with 0.5 m cable.
    1 PC. - chlorine sensor SCLO 3 HYCHLOR
    1 PC. - cable with adapter for SCLO 3 HYCHLOR chlorine sensor
    2 pcs. - reagent level sensor with 2 m cable.
    1 PC. - mounting kit for SCLO 3 HYCHLOR chlorine sensor
    1 PC. - calibration solution PH 7, 55ML
    1 PC. - calibration solution PH 9, 55ML
    2 pcs. - reagent injection valve
    2 pcs. - reagent intake valve
    2 pcs. - reagent intake hose, 4x6, PVC, 2 lm
    2 pcs. - reagent discharge hose, 4x6, PE, 2 lm
    1 PC. - mounting panel 450x600x8 mm

    This category does not contain any products.
    Sale
    Recuperative spiral heat exchanger for mash heating-10m2 — SP-Teploobmen
    Recuperative spiral heat exchanger for mash heating-10m2 — SP-Teploobmen
    1011191
    Recuperative spiral heat exchanger for mash heating-10m2
    Price:
    $7,182.33
    Pre-order only
    - +
    Mechanical seal R-MG1 22, CAR/SIC, EPDM, 304, G60 — SP-Teploobmen
    Mechanical seal R-MG1 22, CAR/SIC, EPDM, 304, G60 — SP-Teploobmen
    13936_22__CAR/SIC__EPDM__304__G60
    Mechanical seal R-MG1 22, CAR/SIC, EPDM, 304, G60
    Price:
    $39.53
    Pre-order only
    - +
    Mechanical seal for Grundfos R-706H (CR) 12, SIC/SIC, EPDM, 304 — SP-Teploobmen
    Mechanical seal for Grundfos R-706H (CR) 12, SIC/SIC, EPDM, 304 — SP-Teploobmen
    14556_12__SIC/SIC__EPDM__304
    Mechanical seal for Grundfos R-706H (CR) 12, SIC/SIC, EPDM, 304
    Price:
    $90.21
    Pre-order only
    - +
    HAUS DDE 4742 chemical decanter centrifuge — SP-Teploobmen
    HAUS DDE 4742 chemical decanter centrifuge — SP-Teploobmen
    16076
    HAUS DDE 4742 chemical decanter centrifuge
    Price:
    On request
    Pre-order only
    - +
    MAXCLEAN 5T separator centrifuge — SP-Teploobmen
    16082
    MAXCLEAN 5T separator centrifuge
    Price:
    On request
    Pre-order only
    - +
    0